All Aurender models support Spotify Connect. With Spotify Connect, you can keep browsing and playing in the Spotify app just as you always do, and listen on your Aurender.
Before you begin
Make sure of the following:
- Your Aurender is running the latest software.
- The Spotify app is updated to the latest version, and you're signed in to your Spotify account.
- Your Aurender and the device running the Spotify app are on the same network.
- On N150, N100, X100, ACS100, and ACS10, a USB DAC is connected and turned on. These models play Spotify through the USB output.
Turn on Spotify Connect
Before you use Spotify Connect for the first time, turn it on in Conductor.
- In the Conductor app, go to Settings > Streaming Services.
- Under External Control Services, tap Spotify.
- Turn on Enable Service.
Note: On A1000 and A1, Spotify Connect is always on, so you can skip these steps.
Tip: Tap Open Spotify App at the bottom of this screen to go straight to the Spotify app.
Play music from the Spotify app
- Open the Spotify app.
- Tap the Connect icon.
- Choose your Aurender from the list of devices.
- Play music in the Spotify app.
Your Aurender appears in the Spotify app with its device name.
Note: If you rename your Aurender, restart it to show the new name in the Spotify app.
Control playback
Use the Spotify app to play, pause, and skip tracks. While Spotify is playing, the front panel shows the track, artist, cover art, and playing time. You can also use Play/Pause, Previous, and Next on the front panel or the remote.
When you play music from Conductor, Spotify stops. To play Spotify again, choose your Aurender in the Spotify app.
Note: If you connect or disconnect a USB DAC while Spotify is playing, Spotify stops. Choose your Aurender again in the Spotify app.
A1000 and A1
- Spotify Connect is always on, so there's nothing to set up in Conductor.
- In the Spotify app, your Aurender appears as its device name followed by āGā.
- While Spotify is playing, Conductor shows the track, artist, album, cover art, and playing time. You can also play, pause, and skip from Conductor.
- On A1000, Spotify doesn't play through the USB output. Choose COAX or Line out. To change the output, go to the Volume tab in Conductor, then tap Output.
- Analog output (Line out and headphones): Adjust the volume from the Spotify app, Conductor, the volume knob, or the remote. The volume stays in sync between them.
- Digital output (COAX): By design, this output sends audio at a fixed volume, so the Spotify app doesn't change it. Adjust the volume on your DAC or amplifier.
If your Aurender doesn't appear in the Spotify app
- Make sure Enable Service is turned on in Conductor.
- Make sure your Aurender and the device running the app are on the same network.
- On N150, N100, X100, ACS100, and ACS10, make sure the USB DAC is connected and turned on.
- Turn Enable Service off and on again, or restart your Aurender.
- Update the Spotify app and your Aurender's software.