Your Aurender supports Qobuz Connect. With Qobuz Connect, you can keep browsing and playing in the Qobuz app just as you always do, and listen on your Aurender.
Before you begin
Make sure of the following:
- Your Aurender is one of these models and is running the latest software:
- Digital output: N50, N30, N30SA, N20, N200, N150, N10, W20, W20SE, N100, N100C, N100SC, X100, ACS100, ACS10
- Analog output: AP20, A1, A30, A20, A15, A200, A100, A10, A1000
- The Qobuz app is updated to the latest version, and you're signed in with a Qobuz subscription.
- Your Aurender and the device running the Qobuz app are on the same network. The Qobuz app can't find your Aurender on a different subnet or VLAN, such as a separate guest Wi-Fi network.
Turn on Qobuz Connect
- In the Conductor app, go to Settings > Streaming Services.
- Under External Control Services, tap Qobuz Connect.
- Turn on Enable Service.
- If your model shows an Output option, choose the output to play Qobuz through. See Change the output below.
Tip: Tap Open Qobuz App at the bottom of this screen to go straight to the Qobuz app.
Play music from the Qobuz app
- Open the Qobuz app.
- Tap the Output device icon.
- Choose your Aurender from the list of devices.
- Play music in the Qobuz app.
Music now plays on your Aurender, and Conductor shows “Connected to Qobuz Connect.”
If you play Qobuz through the USB output, your Aurender appears with “-USB” added to its name.
Note: Names longer than 15 characters are shortened in the Qobuz app. If you rename your Aurender, restart it to show the new name in the Qobuz app.
Change the output
When you change the output, choose your Aurender again in the Qobuz app.
| Output in Conductor | Name in the Qobuz app |
|---|---|
| Any output other than USB (for example, Analog, Speaker, or S/PDIF (COAX, BNC, Optical), AES/EBU, depending on your model) | [Your Aurender's name] |
| USB | [Your Aurender's name]-USB |
- In Conductor, go to Settings > Streaming Services > Qobuz Connect.
- Under Output, choose the output.
- In the Qobuz app, choose the device name shown in Conductor's message.
Note: On A-series models, changing this output also changes your Aurender's main output.
Note: To use USB, connect a USB DAC and turn it on first. If the USB DAC is turned off or disconnected, Qobuz stops playing. Reconnect the DAC to play again.
Adjust the volume
- Analog output (A-series and AP20): Adjust the volume from the Qobuz app, Conductor, the volume knob, or the remote. The volume stays in sync between them.
- Digital and USB outputs: By design, these outputs send audio at a fixed volume, so the Qobuz app doesn't change it. Adjust the volume on your DAC or amplifier.
Note: When Use Direct Output is turned on, the analog output stays at a fixed volume.
Control playback
Use the Qobuz app to control playback. While Qobuz is playing, the front panel shows the track, artist, album, cover art, playing time, and audio format.
You can also use Play/Pause, Previous, and Next on the front panel or the remote. Pressing Stop disconnects your Aurender from the Qobuz app.
If your Aurender doesn't appear in the Qobuz app
- If you just turned on Qobuz Connect, wait a moment, then try again.
- Make sure your Aurender and the device running the app are on the same network.
- If your model uses the USB output, make sure the USB DAC is connected and turned on.
- Update the Qobuz app and your Aurender's software, then restart your Aurender.