A1000 and A1 support TIDAL Connect. With TIDAL Connect, you can keep browsing and playing in the TIDAL app just as you always do, and listen on your Aurender.
Before you begin
Make sure of the following:
- Your Aurender is an A1000 or A1 and is running the latest software.
- The TIDAL app is updated to the latest version, and you're signed in with a TIDAL subscription.
- Your Aurender and the device running the TIDAL app are on the same network.
- On A1000, the output is set to COAX or Line out. TIDAL doesn't play through the USB output on A1000.
Play music from the TIDAL app
TIDAL Connect is always on, so there's nothing to set up in Conductor.
- Open the TIDAL app.
- Tap the device icon.
- Choose your Aurender from the list of devices.
- Play music in the TIDAL app.
In the TIDAL app, your Aurender appears as its device name followed by “G”.
Change the output
To change the output, go to the Volume tab in Conductor, then tap Output.
On A1000, TIDAL doesn't play through the USB output. Choose COAX or Line out.
Adjust the volume
- Analog output (Line out and headphones): Adjust the volume from the TIDAL app, Conductor, the volume knob, or the remote. The volume stays in sync between them.
- Digital output (COAX): By design, this output sends audio at a fixed volume, so the TIDAL app doesn't change it. Adjust the volume on your DAC or amplifier.
Note: When Use Direct Output is turned on, Line out stays at a fixed volume. You can still mute from the TIDAL app, and headphone volume still changes.tud
Control playback
Use the TIDAL app or Conductor to control playback. While TIDAL is playing, Conductor shows the track, artist, album, cover art, and playing time. You can play, pause, and skip from Conductor when the TIDAL app allows it.
The front panel shows the TIDAL Connect icon, the track, and the sample rate. You can also use Play/Pause, Previous, and Next on the front panel or the remote.
If your Aurender doesn't appear in the TIDAL app
- Make sure your Aurender and the device running the app are on the same network.
- Update the TIDAL app and your Aurender's software, then restart your Aurender.