1. Ensure the Aurender S5W speakers are turned on and already paired. If not, please refer to the pairing guide below and complete that process before continuing.
- Paring S5W with USB dongle(Transmitter)
2. To switch between Stereo and Mono modes, ensure both S5W speakers are in close proximity to the remote control to receive the signal simultaneously. If you want to set them individually, you can hold your remote control close to the Aurender logo on each speaker one by one or turn them off one at a time.
3. Press the buttons on your remote control in this order, ensuring there's a 0.5 to 1-second interval between each press: 8 ➝ 10 ➝ 9 ➝ 11 ➝ 7.
4. Once you have pressed the buttons, the speaker mode will switch. If the LED light turns steady Amber, this indicates that the speaker has switched from Stereo mode to Mono mode. Please note that this color indicator is a standard feature; Amber always denotes Mono mode.
5. Similarly, if the LED light turns steady Green after pressing the buttons, this indicates that the speaker has switched from Mono mode to Stereo mode. Please remember that the Green color always represents Stereo mode.
6. If only one channel has been set after the initial process, you might need to take additional steps. Consider holding your remote control close to the Aurender logo on the speaker that hasn't been set yet and repeat the sequence. Alternatively, turn off the speaker that was already set and perform the sequence again. This follows the individual speaker setting method mentioned in the first step.
