Switching Aurender Network Settings from Static IP to DHCP (x.23.316 and Later)

1. Please note: The instructions provided in this guide apply to Aurender devices running system software version x.23.316 or later. If your Aurender is running an earlier version, please update your system software before proceeding.

2. Press the menu button on your Aurender device to switch the front screen to the Player screen.

3. Press and hold the 'previous' button until the Aurender's front screen displays a message saying "Please restart Aurender to apply network setting to DHCP mode". This step will work only if the Aurender device's IP setting is currently set to 'Static IP'.

4. Once the message appears, restart your Aurender device. You can do this by turning off the device using the power button, waiting a few moments, and then turning it back on.

5. After the device restarts, the network setting will have switched from 'Static IP' mode to 'DHCP' mode. If you want to make sure the network setting has successfully switched to DHCP mode, you can confirm this change by opening a web browser and entering the Aurender device's IP address followed by "/network". For example, if your device's IP address is 192.168.0.192, you would enter "192.168.0.192/network" into your web browser's address bar. This will bring up the network settings for your device, where you can verify that the change to DHCP mode has been successfully applied.